2nd year parts only
Depending on the Electronic Controller you are using you are able to operate up to three zoned areas & connect up to four 2 Kwatt or six 1.5 Kwatt infrared heaters per zone. The power setting can be varied and this will affect each zone i.e., whatever setting the controller is set to then this is the power delivered to each zone. However each zone can be manually isolated from the others through the three output circuit breakers. This allows the user to decide how many zones are to be ON.
When Motion Sensors are connected to the Electronic controllers, a specific area or zone can be automatically switched ON & OFF when there is no movement detected in that area. The QHC15 & QHC27 can have up to 3 zones and therefore can have 3 motion sensors connected.
Using our PIR connected into the Electronic Controller, will improve the efficiency of the heaters. The PIR will detect the presence of people by their movement made in specific area or zone, when there is no movement detected after 4 minutes the power to that zone will be automatically turned OFF. The power will automatically be turned on again when another movement or person is detected.
If connected to a heater directly has a switching (max load) capacity of 2 Kwatts and the time is controlled by setting on the PIR only. (Remember never have the PIR facing the heaters as the heaters will remain on).
3 Zone wireless RF transmitter used to control any of our remote controlled Industrial Heating controllers. The transmitter is available with either the wall mounted 3 Zone wireless transmitter or the portable hand held version.
Hard wired 3 zone control module used to control any of our standard Industrial Heating controllers
RF Remote Control System.
The benefit of the remote system is that you can turn your heaters ON or OFF and vary each of the 3 zone¡¦s outputs up and down individually. Once the RF transmetter is in range of controller the range is 100M approx. The remote control system will only work on RF remote ready systems. If your controller has remote ready system? Then all that is require is the remote package which Includes as follows:
One RF transmitter can control 3 zones with any number of compatible controllers (receivers) and linked heaters which can be loacated up to 100m away from the transmitter.
you may already have outdoor heaters installed on your premises and you have no method of controlling your heaters. We offer a range of Controllers giving you Versatility, Conserves energy and Optimizes control.
Versatility: The most flexible intelligent heating control system available. Up to 27 1.0kw heaters can be run in 3 different zones by the one Controller.
Conserves energy: No waste of electricity the heat output can be controlled by user.
Optimizes control: comfortable working temperatures and can reduce running costs when used with a Motion detector (PIR). When there are no people detected in the area being heated the controller will turn off the heater thereby optimizing control. This can save you a lot compared to conventional heating systems.
27kW Industrial Heater Controller (standard) #901250
|
27kW Industrial Heater Controller (remote control receiver) #901251
|
27kW Industrial Heater Controller (remote control receiver and transmitter) #901251T
|
|
---|---|---|---|
Voltage (V) | 230V or 400V 3 phase | 230V or 400V 3 phase | 230V or 400V 3 phase |
Weight (Kg) | 12Kg | 12Kg | 12Kg |
Ingress Protection | IP53 | IP53 | IP53 |
Warranty | 1 Year | 1 Year | 1 Year |
Product Depth (cm) | 14.5 | 14.5 | 14.5 |
Product Height (cm) | 35 | 35 | 35 |
Product Width (cm) | 36 | 36 | 36 |
Package Depth (cm) | 25 | 25 | 25 |
Package Height (cm) | 44.5 | 44.5 | 44.5 |
Package Width (cm) | 47 | 47 | 47 |