Shadow XT Bluetooth 3kW & 4kW Remote Ultra Low Glare Heater

Shadow 2kW ULG Black with Tilt Stand

Shadow 1.5kW & 2.0kW Ultra Low Glare Heaters

Ultra Low Glare – The more subtle heating experience. Beautifully designed and built by our own design and engineering team, this exclusive range of high end heaters not only add heat to your patio or outdoor area, but also a distinct warm ambiance without glaring bright lamps.

Rated as one of the most waterproof heaters in the market – IPx5, the Shadow Patio Heater can be used in absolutely any weather conditions in complete safety. 

1.5kW is the perfect size for small sized patio areas of up to 4 m2.
2.0kW is the perfect size for medium sized patio areas of up to 6 m2.

Performance Features

• Equipped with ‘L’ bracket for wall mounting + hinge to allow positioning
• Long life special Low Glare infrared lamp with 5,000 to 7,000 hours life.
• Equipped with 1.8m of electrical cable and UK plug (maximum allowed under EU regulations)
• Special reflector with scientific parabolic system for top efficiency
• Safety guard
• Heater body in solid black or silver anodised aluminium
• The heater must be mounted in a well ventilated area. There must be at least a 0.25m clearing between the heater and ceilings / roofs
• There must be at least a 0.5m clearing between the heater and adjacent walls / fabrics
• There must be at least a 1.8m clearing between the bottom edge of the heater and the floor

Shadow Tilt Stand

This new heater stand from Shadow offers a stylish and contemporary method of mounting almost all Shadow heaters from 1.5kW to 3kW. Heater stands give the flexibility to move any heater to an area where it’s needed most.

Whether you need to use your heaters for a quiet evening supper, bustling party, al fresco dining or bar area they give the power of Shadow infrared heat to the space you want to heat most without the need to fix your heaters in position for long periods of time.

The new Shadow Tilt stand is the latest take, it has a heavy weight black anodised base which has an incredible patina. The attachment atop the three-piece 60mm pole is versatile and allows easy coupling of Shadow heaters and the new Shadow Vertical Mounting Bracket. The geometry of the tilt stand gives the option of an even wider arch of heat output versus our standard heater stands allowing you to focus more heat from floor to average person height.

Includes 3m IP65 premium extension cable with waterproof connectors when purchased along with any heater

Tech Spec:

Stainless Steel Patio Heater Stand

Tech Spec:

Black Round Base Telescopic Stand

Tech Spec:

Velcro Bracket

Heater Mounting Bracket - Velcro

There are many shapes and sizes of heaters available, however, mounting them where needed can sometimes be a challenge.

The Velcro mounting bracket provides excellent support for the heaviest of heaters and can be fixed either vertically or horizontally as needed due to its two fixing points.

The Velcro bracket is an inspirationally designed piece of kit and will fit onto almost any pole, spar, pipe or wooden support whether it is round square or no shape at all such as the branch of a tree! Indoor or outdoor environments. It offers the convenience of complete portability as it can be fixed or removed in seconds allowing a heater that would normally be fixed in place, to be portable and therefore even more functional and versatile.

Shadow 1.5kW 420mm XT Easyfit Lamp

1.5kW & 2.0kW EasyFit Infrared Heater Lamps for XT and Shadow II Heaters

Manufactured specifically for the latest Shadow ULTRA Low Glare heaters.  

Please carefully check the model of your Shadow heater before ordering.  If you are in any doubt, please call us 1st and we will be more than happy to discuss your requirements and direct you to the correct product.

Technical Data

• Voltage (V) - 230V
• Lamp Holders - EasyFit
• 100mm double insulated electrical leads will fit only EasyFit screw connectors
• Total Power (kW) - 1.5 or 2.0
• Ingress Protection - IPX5
• Lamp Life - 5,000 to 7,000 hours

Tech Spec:

Shadow 2kW 420mm XT Easyfit Lamp

1.5kW & 2.0kW EasyFit Infrared Heater Lamps for XT and Shadow II Heaters

Manufactured specifically for the latest Shadow ULTRA Low Glare heaters.  

Please carefully check the model of your Shadow heater before ordering.  If you are in any doubt, please call us 1st and we will be more than happy to discuss your requirements and direct you to the correct product.

Technical Data

• Voltage (V) - 230V
• Lamp Holders - EasyFit
• 100mm double insulated electrical leads will fit only EasyFit screw connectors
• Total Power (kW) - 1.5 or 2.0
• Ingress Protection - IPX5
• Lamp Life - 5,000 to 7,000 hours

Tech Spec: