3 Zone Master Controller (transmitter) Wall Mounted

3 Zone Transmitter - Wall Mounted version

The remote 3 zone QHVCR controller enables the area being heated can be zoned into three area's Blue, Yellow & Red. Each zone can be controlled separately, this includes setting each zone at a different level. There are 5 setting levels > Off – 1 (33%) - 2 (50%) - 3 (66%) - 4 (100%).

Any combination of our QHC controllers can be used in the proposed zoned layout below. There are 6kW & 18kW controllers available to be used depending on the over all number of heaters required.

Any number of the receivers can be in each zone as long as they are wired within the transmetters 100 meter transmit range. The unit is battery powered and requires 3xAAA batteries.

• Battery operation - 3 x AAA batteries, 4.5 Volts DC.
• Save up to 60% on your energy costs.
• 3 dials for independent 3 channel control.
• This device can control multiple QHC heater controllers at the same time.
• Controls all QHC03MR, QHC06MR, QHC18MR and QHC24MR controllers.
• Transmission over 10 different frequencies for use with multiple QHVCR's.
• 5 variable power settings 1 – 5.
• RF 433mHz.
• Range 70 - 100 meters Long Antenna * note: Line of sight, obstacles may reduce the range.
• 30 – 40 meters Short Antenna. (All controllers within range can be controlled.)
• Battery Low indicator. LED flashes Red.
• Wall mounted version (Hand held version also available.)
• Dimensions H 165mm x W 105mm x D 75mm
• Weight 0.5Kg