Shadow II 1.5kW, 2kW & 3kW ULG+ Patio Heater
See how this cost is calculated, click here
'Gold' refers to the colour of the Infrared lamp coating. All our lamps have a gold coating and are quartz, halogen with tungsten elements.
Designed to be wall mounted with a suitable bracket/fixings included.
Can be attached to suitable pole or stand to create a moveable Free Standing heater.
Cost per hour
Our electric infrared heaters use the latest ECO technology and do not cost the earth to use. They heat outdoor areas far more effectively than gas and emit no carbon into the atmosphere.
This heater only costs
p per hour
to use on its maximum setting.
£+VAT eachSave: £
£+VAT eachSave: £
£+VAT eachSave: £
Heater Mounting Bracket - Velcro
There are many shapes and sizes of heaters available, however, mounting them where needed can sometimes be a challenge.
The Velcro mounting bracket provides excellent support for the heaviest of heaters and can be fixed either vertically or horizontally as needed due to its two fixing points.
The Velcro bracket is an inspirationally designed piece of kit and will fit onto almost any pole, spar, pipe or wooden support whether it is round square or no shape at all such as the branch of a tree! Indoor or outdoor environments. It offers the convenience of complete portability as it can be fixed or removed in seconds allowing a heater that would normally be fixed in place, to be portable and therefore even more functional and versatile.
Shadow Turnable Mounting Bracket - Silver
Shadow Turnable Mounting Bracket
The new Shadow Vertical Mounting Bracket brings a new level of flexibility to the Shadow range. It enable almost all heaters in the Shadow range equipped with vertically mountable lamps to be used in a configuration perpendicular to the standard mounting position.
Each bracket is milled from a solid billet of stainless steel and features a robust two position rotating mechanism which locks into position seamlsessly. Each position automatically locks into place and unlocks under firm pressure, this means it's possible to change the heater position without needing to unbolt any fixings or the use of tools, however, the catch mechanism is sturdy enough to keep any compatible heater in place whatever the conditions outside might be.
Attached to the two-position mechanism is an extended 'L' shape bracket much the same design as the proven Shadow 'L' bracket supplied with most Shadow heaters. For added flexibility this can also be detached, allowing the turnable moutn bracket to be fixed directly to alternitiv fixings, brackets and stands where appropriate.
The Shadow Turnable Mount brings true flexibility to the Shadow range and allows you to specify a Shadow heater system for any purpose. Order today or for more information why not contact our sales and support team who are on hand to give any further assistance you might need.
Wall and stand mounting
For wall mounted heaters or heaters mounted on a stand it enables compatible heaters to be mounted vertical to the ground and project heat more evenly from head to toe. Combined with our heater stands and in particular the Shadow Tile Stand, the vertical mounting bracket.
A great benefit of the vertical mounting bracket is the versatility it brings when mounting Shadow heaters to parasols and fixed structures, often combined with the Shadow Parasol Fixing Bracket it allows you to configure the ultimate outdoors heating setup for any garden, restaurant, large outdoor area or patio at home.
|Shadow 1.5kW & 2kW||✕|
|Shadow 1.5kW & 2kW Remote||✔|
|Shadow 3kW & 4kW||✕|
|Shadow 3kW Remote||✔|
|Shadow XT 1.5kW & 2kW||✔|
|Shadow XT 3kW & 4kW||✔|
|Shadow 3kW Carbon||✔|
|Shadow II 1.5kW & 2kW ULG+||✔|
Bracket Extension Kit - Black
Get more from your Shadow Heater or Shadow Heater configuration with our Shadow Heater Extension Kit, the kit comes with two sizes of extension which allow you to extend the positioning of your Shadow heater to better serve the area you are looking to heat.
1 x 30cm Extension Bracket
1 x 21cm Extension Bracket
Shadow Heater Parasol Arm Fixing Brackets - Black
New to the Shadow brand is our parasol mounting bracket, at last this functional bracket gives the added flexibility our customers have always wanted. The bracket attaches to the horizontal swivel, ‘L’ shaped or vertical mounting bracket to provide an array of options for fixing Shadow heaters to parasol frames and fixed structures.
The Shadow Parasol Fixing Bracket kit comes with three sizes of bracket:
- 35 x 26 mm
- 25 x 21 mm
- 15 x 15 mm
Stainless Steel Patio Heater Stand
Black Round Base Telescopic Stand
Black Round Base Heater Stand
The perfect mobile base to mount almost any wall standing heater on and create a free standing unit to suit any mood or occasion. The weighted base ensures the unit is stable whilst preventing it from becoming a trip hazard as tripod stands can be. The extendable telescopic pole also allows versatility and acts as a variable heat controller by allowing you to control the height of the unit and thus the amount of warmth felt
Features & Technical Data
- Adjustable in height: 846mm - 2115cm
- Base width: 500mm
- Stand Weight: 12.3kg
- Cable management clips
- Heavy duty solid steel base suitable for any surface
- Scratch proof rugged black powder coat.
- Warranty - 2 years
Shadow Tilt Stand
Shadow Tilt Stand
This new heater stand from Shadow offers a stylish and contemporary method of mounting almost all Shadow heaters from 1.5kW to 3kW. Heater stands give the flexibility to move any heater to an area where itís needed most.
Whether you need to use your heaters for a quiet evening supper, bustling party, al fresco dining or bar area they give the power of Shadow infrared heat to the space you want to heat most without the need to fix your heaters in position for long periods of time.
The new Shadow Tilt stand is the latest take, it has a heavy weight black anodised base which has an incredible patina. The attachment atop the three-piece 60mm pole is versatile and allows easy coupling of Shadow heaters and the new Shadow Vertical Mounting Bracket. The geometry of the tilt stand gives the option of an even wider arch of heat output versus our standard heater stands allowing you to focus more heat from floor to average person height.
- Product Info
- Tech Spec
Voltage (V)220-240Weight (Kg)1.5kgWidth (cm)60.3cm (1.5kw) 73.3cm (2.0kw)Height (cm)8.4cm (1.5kw & 2.0kw)Depth (cm)5cm (1.5kw & 2.0kw)Box Width (cm)65 - 78cmBox Height (cm)15cmBox Depth (cm)15cmTotal Power (kW)1.5 or 2Ingress ProtectionIP65GTIN5060405134293
Our Happy Customers
Chelsea Football Club
Restaurant Gordon Ramsay
EDF Energy London Eye
House of Commons
Hilton Hotels & Resorts
Royal Air Force
Lucknam Park Hotel
University of Oxford
Ministry of Sound